Author Topic: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!  (Read 9208 times)

pur2702

  • User OtomaX
  • Jr. Member
  • **
  • Posts: 443
  • VALID UNTIL 26 JUNI
ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« on: May 01, 2012, 08:50:18 AM »
selamat pagi menjelang siang.. temen2 otomax tolong dibantu,, kenapa SW otomax ku sering terjadi ERROR tolong pencerahannya soale aku NEWBIE  :'(
ketika muncul gambar yg aku share link nya dibawah, trx ga bisa dilakukan, lalu pas aku mau login SW OTOMAX chip dongle kadang ga kebaca, kejadian ini sudah 3x terjadi dlm kurun waktu 1minggu ini. sehingga menggangu trx member saya.. tolong pencerahan nya..

OTOMAX STANDAR
OID : 59630022389b41dc69bce9f0cbc543




[attachment deleted by admin]
« Last Edit: May 01, 2012, 09:58:20 AM by pur2702 »
PURNAMA RELOAD (OTOMAX ENTERPRISE 3.6.1)
OID: Yang Pasti ORIGINAL
UPS IWELL 1000VA accu 100AH+65AH + GENSET
MODEM COLOK PAKET HARIAN

inihariku

  • Sr. Member
  • ****
  • Posts: 1,301
  • modal penampilan
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...
« Reply #1 on: May 01, 2012, 08:52:38 AM »
COBA BUKA DI FB GA BISA...ERRORNYA PIYE MAS BRO???
--- >>>  [ kuba ] RELOAD bali <<< ---
:: Penak Jamanku to ::
TELP / SMS BEBAS PULSA : 081 5578 5757
WA: 081333888131

pur2702

  • User OtomaX
  • Jr. Member
  • **
  • Posts: 443
  • VALID UNTIL 26 JUNI
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #2 on: May 01, 2012, 09:01:41 AM »
COBA KLIK link'y mas ato mas login dlo FB nya.,, sekali lg maaf gbs share gambar disini,, aku ga mudeng caranya
PURNAMA RELOAD (OTOMAX ENTERPRISE 3.6.1)
OID: Yang Pasti ORIGINAL
UPS IWELL 1000VA accu 100AH+65AH + GENSET
MODEM COLOK PAKET HARIAN

inihariku

  • Sr. Member
  • ****
  • Posts: 1,301
  • modal penampilan
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #3 on: May 01, 2012, 09:08:17 AM »
COBA KLIK link'y mas ato mas login dlo FB nya.,, sekali lg maaf gbs share gambar disini,, aku ga mudeng caranya

UDAH LOGIN DAN COBA BUKA TETEP GA BISA...KONTEN TIDAK TERSEDIA..BLA BLA..
--- >>>  [ kuba ] RELOAD bali <<< ---
:: Penak Jamanku to ::
TELP / SMS BEBAS PULSA : 081 5578 5757
WA: 081333888131

pur2702

  • User OtomaX
  • Jr. Member
  • **
  • Posts: 443
  • VALID UNTIL 26 JUNI
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #4 on: May 01, 2012, 09:13:52 AM »
tolong ajarin aku share gambar d FORUM mas,, biar bisa d SHARE gambarnya..... trims
PURNAMA RELOAD (OTOMAX ENTERPRISE 3.6.1)
OID: Yang Pasti ORIGINAL
UPS IWELL 1000VA accu 100AH+65AH + GENSET
MODEM COLOK PAKET HARIAN

inihariku

  • Sr. Member
  • ****
  • Posts: 1,301
  • modal penampilan
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #5 on: May 01, 2012, 09:19:10 AM »
tolong ajarin aku share gambar d FORUM mas,, biar bisa d SHARE gambarnya..... trims

> PAS WAKTU REPLAY ANDA KAN MASUK DI FORM MASSAGE ( PESAN )
> DIBAWAH ADA TANDA + Attachments and other options
> klik lalu muncul kotak disebelahnya ada kotak Browse klik lalu pilih foto atau file mana dan lokasinya yg mau dipilih
> selesai

kalo kurang jelas ym saia...
--- >>>  [ kuba ] RELOAD bali <<< ---
:: Penak Jamanku to ::
TELP / SMS BEBAS PULSA : 081 5578 5757
WA: 081333888131

pur2702

  • User OtomaX
  • Jr. Member
  • **
  • Posts: 443
  • VALID UNTIL 26 JUNI
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #6 on: May 01, 2012, 09:24:56 AM »
minta ID YM'y mas.. ini ID YM saya dhevanieazzahra@yahoo.com nope 085759000234
PURNAMA RELOAD (OTOMAX ENTERPRISE 3.6.1)
OID: Yang Pasti ORIGINAL
UPS IWELL 1000VA accu 100AH+65AH + GENSET
MODEM COLOK PAKET HARIAN

aprina

  • Jr. Member
  • **
  • Posts: 226
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #7 on: May 01, 2012, 10:47:27 AM »
angkat..... user baru bozz... tolong bantu.......
APRINA RELOAD
OtomaX Advance
OID: 02276387408763e679af3efb8b6247
CSO: aprinareload_talk@yahoo.com
e-mail: aprina_reload@yahoo.com
Bank: BCA, Mandiri, BNI
UPS dan GENSET
Speedy Unlimited
Jl. Flamboyan No. 11 Purwakarta Jawa Barat

falcon

  • Sr. Member
  • ****
  • Posts: 1,393
  • Lu' Luul Qomariyah
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #8 on: May 01, 2012, 10:57:40 AM »
Coba Net.Famework nya di instal ulang bos.....!!
Sebelumnya backup dulu database oto... cara mudahnya cuman copaste aja
FFmax KOMPUTER
Jl. Raya Karangsuko 28 Pagelaran Kab. Malang
Tlp: 081555848666, 081334888555 PIN 265DE8E5
OTOMAX SUPORT

pur2702

  • User OtomaX
  • Jr. Member
  • **
  • Posts: 443
  • VALID UNTIL 26 JUNI
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #9 on: May 01, 2012, 11:34:00 AM »
ada lagi SOLUSI lain selain INUL netFRAMwork????
PURNAMA RELOAD (OTOMAX ENTERPRISE 3.6.1)
OID: Yang Pasti ORIGINAL
UPS IWELL 1000VA accu 100AH+65AH + GENSET
MODEM COLOK PAKET HARIAN

Yusuf

  • Administrator
  • Sr. Member
  • ****
  • Posts: 1,337
    • Orisinil.com
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #10 on: May 01, 2012, 11:52:39 AM »
selamat pagi menjelang siang.. temen2 otomax tolong dibantu,, kenapa SW otomax ku sering terjadi ERROR tolong pencerahannya soale aku NEWBIE  :'(
ketika muncul gambar yg aku share link nya dibawah, trx ga bisa dilakukan, lalu pas aku mau login SW OTOMAX chip dongle kadang ga kebaca, kejadian ini sudah 3x terjadi dlm kurun waktu 1minggu ini. sehingga menggangu trx member saya.. tolong pencerahan nya..

OTOMAX STANDAR
OID : 59630022389b41dc69bce9f0cbc543

Bos, cuma mengingatkan kembali. Alangkah jauh lebih baik jika tombol detailsnya diklik. It does help us (programmers) :)

pur2702

  • User OtomaX
  • Jr. Member
  • **
  • Posts: 443
  • VALID UNTIL 26 JUNI
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #11 on: May 01, 2012, 01:02:23 PM »
dear admit : jika d klik yg detail'y byk sekali WINDOW error yg muncul dibawah'y... dan klo boleh tau,, apa penyebab utama'y.. tolong pencerahan nya mas admint.. trims
PURNAMA RELOAD (OTOMAX ENTERPRISE 3.6.1)
OID: Yang Pasti ORIGINAL
UPS IWELL 1000VA accu 100AH+65AH + GENSET
MODEM COLOK PAKET HARIAN

Yusuf

  • Administrator
  • Sr. Member
  • ****
  • Posts: 1,337
    • Orisinil.com
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #12 on: May 01, 2012, 01:13:12 PM »
sulit untuk mengetahui masalahnya jika hanya ERROR yang dilaporkan. Akan membantu jika ada error messagenya, apalagi dilengkapi dengan kronologis kejadian agar programer bisa rekontruksi.

trims.

pur2702

  • User OtomaX
  • Jr. Member
  • **
  • Posts: 443
  • VALID UNTIL 26 JUNI
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #13 on: May 01, 2012, 01:33:48 PM »
ouh gtu ya mas admint.... ini deh aku share lg gambar error nya... mudah2an terlihat jelas all nya aku photo pke HP..

[attachment deleted by admin]
PURNAMA RELOAD (OTOMAX ENTERPRISE 3.6.1)
OID: Yang Pasti ORIGINAL
UPS IWELL 1000VA accu 100AH+65AH + GENSET
MODEM COLOK PAKET HARIAN

falcon

  • Sr. Member
  • ****
  • Posts: 1,393
  • Lu' Luul Qomariyah
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #14 on: May 01, 2012, 03:04:38 PM »
ouh gtu ya mas admint.... ini deh aku share lg gambar error nya... mudah2an terlihat jelas all nya aku photo pke HP..

Langsung aja kopaste disini hasilnya error td gak perlu pakai hp....ASLI GAK BISA TERBACA  ;D  ;D
FFmax KOMPUTER
Jl. Raya Karangsuko 28 Pagelaran Kab. Malang
Tlp: 081555848666, 081334888555 PIN 265DE8E5
OTOMAX SUPORT

Yusuf

  • Administrator
  • Sr. Member
  • ****
  • Posts: 1,337
    • Orisinil.com
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #15 on: May 01, 2012, 03:15:38 PM »
kronologisnya seperti apa? mohon infokan versi brp? 2.8 atau lainnya?

Trims.

suryo

  • Jr. Member
  • **
  • Posts: 198
  • 03547688688
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #16 on: May 01, 2012, 03:41:46 PM »
ouh gtu ya mas admint.... ini deh aku share lg gambar error nya... mudah2an terlihat jelas all nya aku photo pke HP..
boz mau nanya pake aplikasi ad on gak?
YM Customer service


superbebek

  • Jr. Member
  • **
  • Posts: 263
  • Mencoba Memahami Pilihanku
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #17 on: May 01, 2012, 06:39:52 PM »
ouh gtu ya mas admint.... ini deh aku share lg gambar error nya... mudah2an terlihat jelas all nya aku photo pke HP..

sulit untuk mengetahui masalahnya jika hanya ERROR yang dilaporkan. Akan membantu jika ada error messagenya, apalagi dilengkapi dengan kronologis kejadian agar programer bisa rekontruksi.

trims.

sama2x newbie bos...

coba "ERROR MESSAGE"  di upload juga ( bukan di poto  ;D ), supaya bisa dibaca bigbos,
cara newbie sich gini....
otomax error-klik Ok, timbul keterangan error..taruh kursor di awal tulisan terus di blok, sampai bawah copy terus paste di postingan...
cmiw...cuman newbek...
 
OID: CigLZ6DGuA_d6M442$HDSy59ORtAL73Ow
" Hidup seperti PENDAKIAN, bukan SECEPAT apa, tapi BAGAIMANA "
"...... Memahami Pilihanku"

Andi Jaderock

  • Sr. Member
  • ****
  • Posts: 1,081
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #18 on: May 01, 2012, 06:47:29 PM »
coba hubungi Dealer aja bos... biar bisa cek langsung

www.orisinil.com/otomax/kontak
WA: 0822-6118-2991
Telegram : @andijaderock
Jabber: jaderock78@zm-mobile.com
Gtalk : jaderock168@gmail.com

pur2702

  • User OtomaX
  • Jr. Member
  • **
  • Posts: 443
  • VALID UNTIL 26 JUNI
Re: ERROR TERUS SW OTOMAX SAYA TOLONG2...!!!
« Reply #19 on: May 01, 2012, 08:38:07 PM »
INI LOH GAN MESAGE ERROR NYA:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at  .(Object , DataGridViewDataErrorEventArgs )
   at System.Windows.Forms.DataGridView.OnDataError(Boolean displayErrorDialogIfNoHandler, DataGridViewDataErrorEventArgs e)
   at System.Windows.Forms.DataGridView.OnDataErrorInternal(DataGridViewDataErrorEventArgs e)
   at System.Windows.Forms.DataGridView.CommitEdit(DataGridViewCell& dataGridViewCurrentCell, DataGridViewDataErrorContexts context, DataGridViewValidateCellInternal validateCell, Boolean fireCellLeave, Boolean fireCellEnter, Boolean fireRowLeave, Boolean fireRowEnter, Boolean fireLeave)
   at System.Windows.Forms.DataGridView.EndEdit(DataGridViewDataErrorContexts context, DataGridViewValidateCellInternal validateCell, Boolean fireCellLeave, Boolean fireCellEnter, Boolean fireRowLeave, Boolean fireRowEnter, Boolean fireLeave, Boolean keepFocus, Boolean resetCurrentCell, Boolean resetAnchorCell)
   at System.Windows.Forms.DataGridView.OnValidating(CancelEventArgs e)
   at System.Windows.Forms.Control.NotifyValidating()
   at System.Windows.Forms.Control.PerformControlValidation(Boolean bulkValidation)
   at System.Windows.Forms.ContainerControl.ValidateThroughAncestor(Control ancestorControl, Boolean preventFocusChangeOnError)
   at System.Windows.Forms.ContainerControl.EnterValidation(Control enterControl)
   at System.Windows.Forms.ContainerControl.UpdateFocusedControl()
   at System.Windows.Forms.ContainerControl.AssignActiveControlInternal(Control value)
   at System.Windows.Forms.ContainerControl.ActivateControlInternal(Control control, Boolean originator)
   at System.Windows.Forms.ContainerControl.ActivateControlInternal(Control control)
   at System.Windows.Forms.Control.WmSetFocus(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
OtomaX
    Assembly Version: 2.0.0.0
    Win32 Version: 2.9
    CodeBase: file:///D:/otomax/OtomaX.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
OtomaX
    Assembly Version: 2.0.0.0
    Win32 Version: 2.9
    CodeBase: file:///D:/otomax/OtomaX.exe
----------------------------------------
otomax_lib
    Assembly Version: 1.0.0.0
    Win32 Version: 2.1
    CodeBase: file:///D:/otomax/otomax_lib.DLL
----------------------------------------
System.Data
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Transactions
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.EnterpriseServices
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------
agsXMPP
    Assembly Version: 1.1.0.0
    Win32 Version: 1.1.0.0
    CodeBase: file:///D:/otomax/agsXMPP.DLL
----------------------------------------
System.Management
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
Accessibility
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.


PURNAMA RELOAD (OTOMAX ENTERPRISE 3.6.1)
OID: Yang Pasti ORIGINAL
UPS IWELL 1000VA accu 100AH+65AH + GENSET
MODEM COLOK PAKET HARIAN