Smart Software for Otomax || http://smartsoftware.web.id/

[Budi Santoso]

...:: Register Telegram ::..
- Buka App Telegram pada HP
- cari BotFather
- mulai percakapan
- kirim /newbot
- masukkan nama
- masukkan nama_bot
- akan dpt id HTTP API

..:: Cara Paralel supaya RS bisa Transaksi ::..
- RS cari Center Telegram server
- ketik TID (huruf besar semua) untuk mengetahui ID Telegram RS tersebut
- suruh paralel pakai format Paralel Gtalk  misal GT*152437@telegram.org*1234, via sms/ym
- Finish


..:: Register Account WhatsApp Baru ::..
- buka browser
- masuk ke http://localhost/smartcenter/whatsapp/reg.php
- ikutin langkah2nya...


Noted:
- Methode ini memungkinkan kita bisa pakai Unlimited WA center dan Telegram Center, tergantung berapa banyak Modul IP otomax yang bisa di pakai..

[ARMASPM]

lha ini dia yg ditunggu2 muncul.... hihihi...

bismillahirrohmanirrohiimmm  nyoba eksekusi.....

TUK PASSWORD wa DIDAPAT DRMANA PAK??
di generate dr modul smartpayment ato by request??

[againdo2]

saya ga dapat bantuan cs, krn ga bayar biaya backup online 

biaya backup online jujur saya cm ambil center wa nya, kebetulan center wa 1 bln ini off, makanya libur bayar dl.heeee... begitu ini kluar kok ga dapat bantuan...heee.....

Sama pak,
saya sudah bbm pak budi ga dibaca masih D aja 

padahal minta bantuan setting sekalian mau bayar biaya backup online, tapi malah dicuekin 

[khrapr]

..:: Setting pada OtomaX ::..
1. Buat Kelompok Jawaban
 - kata kunci
    a. Maximum execution time
    b. LoginFailureException
    c. htdocs\
 - prioritas
    a. 0
    b. 0
    c. 10
 - parameter balasan
    a. jawaban=Refresh, @[now]
    b. jawaban=Login Failed, @[now]
 - status
    a. Kirim Ulang
    b. Kirim Ulang
    c. Kirim Ulang

2. Bikin Modul WHatsApp
  - Tambah Modul IP
  - Kelompok jawaban = wa
  - kirim ke = http://localhost/smartcenter/whatsapp/index.php?
  - parameter parsing = no_wa=628xxxxxxx|password=Kjerjxxxxxxxxx
  - initial parsing = no_wa=[no_wa]&password=[password]
  - default parsing = no_wa=[no_wa]&password=[password]

3. Bikin Modul Telegram
  - Tambah Modul IP
  - Kelompok jawaban = wa
  - kirim ke = http://localhost/smartcenter/telegram/index.php?
  - parameter parsing = id=xxxxxxxxx
  - initial parsing = id=[id]
  - default parsing = id=[id]
     * id  = id HTTP API yang di dapat ketika register TELEGRAM bot

4. Bikin Produk dan parsing
 - Buatlah produk WA dan parsingkan ke IP WA
 - Buatlah produk TELEG dan parsingkan ke IP Telegram

cara untuk register telegram bot bgmn ?

[sunaryo]

tipe IP apa pak? pas di modulnya text atau get atau pos
kemudian file2x yang didownload diinstal semua? trus pasword rar nya apa pak

[M.A.M]

tipe IP apa pak? pas di modulnya text atau get atau pos
kemudian file2x yang didownload diinstal semua? trus pasword rar nya apa pak

Password nya di atas kan sudah dikasih pak Budi tu mas  (coba baca teliti  )

[ARMASPM]

..:: Install SmartCenter ::..

7. Setting PHP
 - Buka Xampp control
 - Klik Config Apache, pilih PHP.ini
 - Masukkan baris antara /* xxxxxxx */ pada config.php di smartcenter
 - Stop Apache dan lalu Start Lagi

8. Setting Config SmartCenter
 - Buka File config.php dengan notepad
 - Sesuaikan Configurasi Database (buatkan login database khusus)
 - Setting Account, sesuaikan dengan Account SmartSoftware
 - Simpan


PassZip : SubhanaAllah

PAK.. TERKENDALA DI STEP YG INI..
MOHON DIPERJELAS tutornya...

baris antara /* xxxxxxx */ pada config.php

isinya:

[PHP]

;;;;;;;;;;;;;;;;;;;
; About php.ini   ;
;;;;;;;;;;;;;;;;;;;
; PHP's initialization file, generally called php.ini, is responsible for
; configuring many of the aspects of PHP's behavior.

; PHP attempts to find and load this configuration from a number of locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable. (As of PHP 5.2.0)
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
; 4. Current working directory (except CLI)
; 5. The web server's directory (for SAPI modules), or directory of PHP
; (otherwise in Windows)
; 6. The directory from the --with-config-file-path compile time option, or the
; Windows directory (C:\windows or C:\winnt)
; See the PHP docs for more specific information.
; http://php.net/configuration.file

; The syntax of the file is extremely simple.  Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.

; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory.  Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from www.example.com.  Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; http://php.net/ini.sections

; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation.  If PHP can't find an expected
; directive because it is not set or is mistyped, a default value will be used.

; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
; previously set variable or directive (e.g. ${foo})

; Expressions in the INI file are limited to bitwise operators and parentheses:
; |  bitwise OR
; ^  bitwise XOR
; &  bitwise AND
; ~  bitwise NOT
; !  boolean NOT

; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.

; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:

;  foo =         ; sets foo to an empty string
;  foo = None    ; sets foo to an empty string
;  foo = "None"  ; sets foo to the string 'None'


; allow_call_time_pass_reference
;   Default Value: On
;   Development Value: Off
;   Production Value: Off

; display_errors
;   Default Value: On
;   Development Value: On
;   Production Value: Off

; display_startup_errors
;   Default Value: Off
;   Development Value: On
;   Production Value: Off

; error_reporting
;   Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
;   Development Value: E_ALL
;   Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT

; html_errors
;   Default Value: On
;   Development Value: On
;   Production value: Off

; log_errors
;   Default Value: Off
;   Development Value: On
;   Production Value: On

; magic_quotes_gpc
;   Default Value: On
;   Development Value: Off
;   Production Value: Off

; max_input_time
;   Default Value: -1 (Unlimited)
;   Development Value: 60 (60 seconds)
;   Production Value: 60 (60 seconds)

; output_buffering
;   Default Value: Off
;   Development Value: 4096
;   Production Value: 4096

; register_argc_argv
;   Default Value: On
;   Development Value: Off
;   Production Value: Off

; register_long_arrays
;   Default Value: On
;   Development Value: Off
;   Production Value: Off

; request_order
;   Default Value: None
;   Development Value: "GP"
;   Production Value: "GP"

; session.bug_compat_42
;   Default Value: On
;   Development Value: On
;   Production Value: Off

; session.bug_compat_warn
;   Default Value: On
;   Development Value: On
;   Production Value: Off

; session.gc_divisor
;   Default Value: 100
;   Development Value: 1000
;   Production Value: 1000

; session.hash_bits_per_character
;   Default Value: 4
;   Development Value: 5
;   Production Value: 5

; short_open_tag
;   Default Value: On
;   Development Value: Off
;   Production Value: Off

; track_errors
;   Default Value: Off
;   Development Value: On
;   Production Value: Off

; url_rewriter.tags
;   Default Value: "a=href,area=href,frame=src,form=,fieldset="
;   Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
;   Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"

; variables_order
;   Default Value: "EGPCS"
;   Development Value: "GPCS"
;   Production Value: "GPCS"

;;;;;;;;;;;;;;;;;;;;
; php.ini Options  ;
;;;;;;;;;;;;;;;;;;;;
; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
;user_ini.filename = ".user.ini"

; To disable this feature set this option to empty value
;user_ini.filename =

; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
; http://php.net/engine
engine=On

; This directive determines whether or not PHP will recognize code between
; <? and ?> tags as PHP source which should be processed as such. It's been
; recommended for several years that you not use the short tag "short cut" and
; instead to use the full <?php and ?> tag combination. With the wide spread use
; of XML and use of these tags by other languages, the server can become easily
; confused and end up parsing the wrong code in the wrong context. But because
; this short cut has been a feature for such a long time, it's currently still
; supported for backwards compatibility, but we recommend you don't use them.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/short-open-tag
short_open_tag=Off
; XAMPP for Linux is currently old fashioned
;short_open_tag = On

; Allow ASP-style <% %> tags.
; http://php.net/asp-tags
asp_tags=Off

; The number of significant digits displayed in floating point numbers.
; http://php.net/precision
precision=14

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
; http://php.net/y2k-compliance
y2k_compliance=On

; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before pushing that
; data to the client. If your application's output exceeds this setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can yield some
; interesting side-effects depending on your application and web server.
; You may be able to send headers and cookies after you've already sent output
; through print or echo. You also may see performance benefits if your server is
; emitting less packets due to buffered output versus PHP streaming the output
; as it gets it. On production servers, 4096 bytes is a good setting for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering Control
;   functions.
; Possible Values:
;   On = Enabled and buffer is unlimited. (Use with caution)
;   Off = Disabled
;   Integer = Enables the buffer and sets its maximum size in bytes.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; http://php.net/output-buffering
output_buffering=4096

; You can redirect all of the output of your scripts to a function.  For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
;   directive. Instead, explicitly set the output handler using ob_start().
;   Using this ini directive may cause problems unless you know what script
;   is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
;   and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
;   Instead you must use zlib.output_handler.
; http://php.net/output-handler
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
;   outputs chunks that are few hundreds bytes each as a result of
;   compression. If you prefer a larger chunk size for better
;   performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
;   output_handler, or otherwise the output will be corrupted.
; http://php.net/zlib.output-compression
zlib.output_compression=Off

; http://php.net/zlib.output-compression-level
;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
; http://php.net/zlib.output-handler
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block.  This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block.  Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
; http://php.net/implicit-flush
; Note: This directive is hardcoded to On for the CLI SAPI
implicit_flush=Off

; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified function is
; not defined, or if the function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=

; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision=100

; This directive allows you to enable and disable warnings which PHP will issue
; if you pass a value by reference at function call time. Passing values by
; reference at function call time is a deprecated feature which will be removed
; from PHP at some point in the near future. The acceptable method for passing a
; value by reference to a function is by declaring the reference in the functions
; definition, not at call time. This directive does not disable this feature, it
; only determines whether PHP will warn you about it or not. These warnings
; should enabled in development environments only.
; Default Value: On (Suppress warnings)
; Development Value: Off (Issue warnings)
; Production Value: Off (Issue warnings)
; http://php.net/allow-call-time-pass-reference
allow_call_time_pass_reference=Off

; Safe Mode
; http://php.net/safe-mode
safe_mode=Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
; http://php.net/safe-mode-gid
safe_mode_gid=Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
; http://php.net/safe-mode-include-dir
safe_mode_include_dir=

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
; http://php.net/safe-mode-exec-dir
safe_mode_exec_dir=

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here.  By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note:  If this directive is empty, PHP will let the user modify ANY
;   environment variable!
; http://php.net/safe-mode-allowed-env-vars
safe_mode_allowed_env_vars=PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv().  These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
; http://php.net/safe-mode-protected-env-vars
safe_mode_protected_env_vars=LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined directory
; and below.  This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/open-basedir
;open_basedir =

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-functions
disable_functions=

; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-classes
disable_classes=

; Colors for Syntax Highlighting mode.  Anything that's acceptable in
; <span style="color: ?"> would work.
; http://php.net/syntax-highlighting
;highlight.string  = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg      = #FFFFFF
;highlight.default = #0000BB
;highlight.html    = #000000

[Revolusindo]

haduh..
Berat ternyata harus remot 1 1, Mohon Maaf bagi yang tidak kehandle,
berikut kami coba berikan urutan2 panduannnya

..:: Setting pada OtomaX ::..
1. Buat Kelompok Jawaban
 - kata kunci
    a. Maximum execution time
    b. LoginFailureException
    c. htdocs\
 - prioritas
    a. 0
    b. 0
    c. 10
 - parameter balasan
    a. jawaban=Refresh, @[now]
    b. jawaban=Login Failed, @[now]
 - status
    a. Kirim Ulang
    b. Kirim Ulang
    c. Kirim Ulang

2. Bikin Modul WHatsApp
  - Tambah Modul IP
  - Kelompok jawaban = wa
  - kirim ke = http://localhost/smartcenter/whatsapp/index.php?
  - parameter parsing = no_wa=628xxxxxxx|password=Kjerjxxxxxxxxx
  - initial parsing = no_wa=[no_wa]&password=[password]
  - default parsing = no_wa=[no_wa]&password=[password]

3. Bikin Modul Telegram
  - Tambah Modul IP
  - Kelompok jawaban = wa
  - kirim ke = http://localhost/smartcenter/telegram/index.php?
  - parameter parsing = id=xxxxxxxxx
  - initial parsing = id=[id]
  - default parsing = id=[id]
     * id  = id HTTP API yang di dapat ketika register TELEGRAM bot

4. Bikin Produk dan parsing
 - Buatlah produk WA dan parsingkan ke IP WA
 - Buatlah produk TELEG dan parsingkan ke IP Telegram

Woooo  Mantabs mencermati n nunggu testimoni Rekan2 dulu

[khrapr]

masih bingung dapatkan id telegram, ketik TID ke center telegram tidak ada balasan, sudah melalui langkap membuat bot

[ARORA COMMUNICATION]

zip file password please

[ARMASPM]

masih bingung dapatkan id telegram, ketik TID ke center telegram tidak ada balasan, sudah melalui langkap membuat bot

via hp register dulu gan..
lalu search account botfather new message kirim /newbot ketik nama input lg nama_bot
ntr akan ada balsannya

[ARMASPM]

zip file password please

speak syahadat 3x

then type password :

SubhanaAllah


it means the grace of allah swt then the safana corp can find ideas BOT hopefully this month.I'll the mercy of Allah swt This feature can run longer without blocked again. amin....
 

 

[sunaryo]

7. Setting PHP
 - Buka Xampp control
 - Klik Config Apache, pilih PHP.ini
 - Masukkan baris antara /* xxxxxxx */ pada config.php di smartcenter
 - Stop Apache dan lalu Start Lagi

ada yang bisa ngasih gambar letak baris yang dimasukin di php.ini yang mana?

[khrapr]

via hp register dulu gan..
lalu search account botfather new message kirim /newbot ketik nama input lg nama_bot
ntr akan ada balsannya

sudah ketik TID tidak ada balasan dari bot yang telah dibuat

sudah bisa ternyata ngirimnya ke bot yang sudah dibuat.

[sunaryo]

 Fatal error: Maximum execution time of 90 seconds exceeded in C:\xampp\htdocs\smartcenter\whatsapp\src\whatsprot.class.php on line 305

ini kenapa ya?

[khrapr]

 Fatal error: Maximum execution time of 90 seconds exceeded in C:\xampp\htdocs\smartcenter\whatsapp\src\whatsprot.class.php on line 305

ini kenapa ya?

kalo saya melakukan transaksi dgn produk WA dan TELEG ke IP WA agar selalu on

[sunaryo]

kalo saya melakukan transaksi dgn produk WA dan TELEG ke IP WA agar selalu on

caranya gimana mas he he
Soalnya balasannya format salah je 

[Timus]

Buah kesabaran... Manis
Lanjut Mas Bud...

[pututpujiono]

download smartcenter.zip dmn?

[khrapr]

Response ->
 Fatal error: Uncaught exception 'LoginFailureException' in D:\xampp\htdocs\smartcenter\whatsapp\src\Login.php:54 Stack trace: #0 D:\xampp\htdocs\smartcenter\whatsapp\src\whatsprot.class.php(286): Login-&gt;doLogin() #1 D:\xampp\htdocs\sma...


ada yang tahu pesan kesalahan tersebut artinya apa ? Saat mau membuat center WA kedua.